(I), the main purpose: the clutch is mainly used in mechanical transmission, in the main driven part of the relatively low speed or zero case, to achieve the driven part of the active part of the combination, which play starts and stops commutation, positioning other purposes. Widely used in metal processing machinery, metallurgy and rolling mill machinery, packaging machinery, medical machinery, food processing machinery, textile printing and dyeing machinery, paper machinery, precision machine tool and other industries.

(Ii), the clutch can be reliably work under the following conditions:

1, the clutch installation site altitude of not more than 2000m;

2, the ambient temperature -5 ° C to +40 ° C;

Three surrounding medium in no danger of explosion, and no gas and conductive dust enough to corrode metal and damage the insulation;

4, the clutch coil voltage fluctuations should not exceed +5% and -15% of rated voltage;

5, clutch lubrication and no lubrication case.

(Iii), to install:

1, the clutch may be the level of installation can also be mounted vertically, the clutch mounted on the shaft concentricity less than 0.05mm and to ensure that the δ value of the work space should be maintained between the driving shaft and driven shaft;

2 clutch installed before the end surfaces of teeth should be cleaned;

3, clutch master, slave part of the axial to be fixed, and not to axial movement.

The main performance parameters

Main Technical Data