DMZ3-05, DMZ3-08, DMZ3-15 the, DMZ3-30-40 in DMZ3 Electromagnetic Power Lost Brake

DMZ3-05, DMZ3-08, DMZ3-15 the, DMZ3-30-40 in DMZ3 Electromagnetic Power Lost Brake

DMZ3-05, DMZ3-08, DMZ3-15 the DMZ3-30-40 in DMZ3 Electromagnetic Power Wenner Electromagnetic Power Electromagnetic Power Lost Brakes manufacturers details

DMZ3-05, DMZ3-08 the, DMZ3-15, DMZ3-30, DMZ3-40 Electromagnetic Power, Wenner electromagnetic loss of power brakes, electromagnetic loss of power brake manufacturer

1 Introduction

  DMZ3 Series Electromagnetic Power from the energized (released), power-off friction brake of spring brake. And Y series electric supporting YEJ series electromagnetic brake three-phase asynchronous motor. Widely used in metallurgy, construction, chemical, food, machine tools, packaging machinery, and power (anti-insurance) brake and other occasions.
  This brake has a compact structure, easy installation, wide applicability, low noise, high operating frequency, sensitive, reliable braking, etc., is one ideal implementation of automation components.

Two performance parameters:

	DMZ3-05	DMZ3-08	DMZ3-15	DMZ3-30	DMZ3-40	DMZ3-80	DMZ3-150	DMZ3-200	DMZ3-300	DMZ3-450
Supporting YEJ motor machine frame size	71	80	90	100	112	132	160	180	200	225
Rated torque (Nm)	5	8	15	30	40	80	150	200	300	450
Rated Power P20 ℃ (W)	30	40	55	70	85	100	120	135	170	180
Turn-on time (≤ ms)	63	87	110	140	152	165	214	252	303	359
Off time (≤ ms)	55	72	95	120	130	140	180	210	250	270
Maximum working air gap & max (mm)	0.8	A	A	A	A	1.2	1.2	1.2	1.5	1.5
Rated voltage (V DC)	99	99	99	99	170	170	170	170	170	170
Allow the maximum operating speed (rpm)	3000	3000	3000	3000	3000	3000	3000	3000	3000	3000

3, the manual release device for use:

  This is a soft and hard release of the manual device. Tighten the release screw, through the ball to promote the release of the board, thereby pulling the armature to lift the brake, unscrew the screws, the armature spring force reset to restore the braking state, which is hard to release; soft release shall release replaced the handle. now to the back-end wrench to remove the brake. (See installation diagram)

4 Outline and installation size:

	d	D1	D2	D3	D4	D5	b	h	H1	H2	H3	H4	H5	L	δ
DMZ3-05	14.8	3 × M5	90	78	51	102	5	16.2	56	2	35	80	62	20	0.2
DMZ3-08	19.8	3 × M5	105	92	65	118	6	21.6	66	3	43	85	70	20	0.3
DMZ3-15	24.8	3 × M6	114	98	65	128	8	28.1	75	3	50	95	76	25	0.4
DMZ3-30	29.5	3 × M6	133	118	80	147	8	32.8	75	3	51	106	88	30	0.4
DMZ3-40	29.5	3 × M8	150	131	90	167	8	32.8	78	3	51	118	98	30	0.5
DMZ3-80	39.5	3 × M8	170	151	104	188	12	42.8	91	3	62	130	110	30	0.5
DMZ3-150	44.5	4 × M10	202	181	120	222	12	47.8	95	3.5	68	150	128	35	0.6
DMZ3-200	53	4 × M10	244	220	140	265	16	57.3	110	3.5	72	180	150	40	0.6
DMZ3-300	59	4 × M12	280	254	170	310	18	63.4	127	3.5	88	205	175	50	0.8
DMZ3-450	65	4 × M12	300	274	180	330	18	69.4	130	3.5	93	220	185	56	0.8

5 Installation: Installation Notes

● friction plate and armature surface should oil be kept clean.
● The installation must ensure that the air gap "δ".
● spline bushing shall axial movement.
● After installation, you must spin the hollow bolt in the motor cover or the flange.

6, the installation diagram
1, motor cover
2, the hollow bolt
3, the brake disc
4, the armature
5, spline bushing
6, mounting screws
7, the yoke assembly
8, the release of the screw
9, the release of the board