BR0.1-8, BR0.1-9, BR0.1-10, plate cooler, the Wenner plate cooler, plate cooler manufacturers BR0.1-8, BR0.1-9, BR0.1-10 , plate cooler, Wenner plate cooler, plate cooler manufacturer

● The plate heat exchanger by the heat transfer plate, sealing pads, clamping bolt, clamping plate and framework.

● high heat transfer efficiency: hot and cold medium flows through the respective channels through the adjacent plate heat exchanger, due to the ripple on the heat transfer plate prompted the media to the formation of turbulence, and therefore obtain a higher heat transfer efficiency. And the turbulence they generate self-purification and anti-scaling effect, less precipitation and fouling.

● Heat transfer coefficient: General K value can reach 3000 ~ 6500W / m2 (water - water heat exchanger) is the same flow rate of 2-4 times the shell and tube heat exchangers, plate heat exchanger only need to shell and tube change heat an area of ??1/2 to 1/4, we can achieve the same effect of heat transfer.

● Use a safe and reliable: sealing mat has a signal hole, the timely detection of leakage and exclusion, the security alarm to avoid both media mixed.

● Compact, small size, light weight, small footprint, the same heat transfer area of ??the shell and tube heat exchanger, 1/3 to 1/8.

● heat loss: plate heat exchanger compact structure, small size, surface area is also very small, so heat losses are small, usually does not require insulation.

● adjustment, easy maintenance: one of the main features of the plate heat exchanger is easy disassembly. Loosen the compression nut to cleaning maintenance, replacement pads or plates, but also by changes in the plate and the change in process combination, you can change the heat transfer area, the treatment capacity and the heat transfer coefficient, so that users get the most good effect of heat transfer.